home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
kermit.columbia.edu
/
kermit.columbia.edu.tar
/
kermit.columbia.edu
/
newsgroups
/
misc.20030409-20031118
/
000126_jdanskinner@jdanskinner.com_Tue Jun 3 09:29:21 EDT 2003.msg
< prev
next >
Wrap
Text File
|
2003-11-18
|
3KB
|
87 lines
Article: 14351 of comp.protocols.kermit.misc
Path: newsmaster.cc.columbia.edu!phl-feed.news.verio.net!nntp1.tagonline.com!bstnma1-snf1.gtei.net!nycmny1-snh1.gtei.net!news.gtei.net!newsfeed!news.tele.dk!news.tele.dk!small.news.tele.dk!sn-xit-02!sn-xit-04!sn-xit-06!sn-post-01!supernews.com!corp.supernews.com!not-for-mail
From: JDan Skinner <jdanskinner@jdanskinner.com>
Newsgroups: comp.protocols.kermit.misc
Subject: Re: Trouble with dialup connection from K95
Date: Mon, 02 Jun 2003 20:55:59 -0500
Organization: JDanSkinner.com
Message-ID: <vdo01ti3qmnv9a@corp.supernews.com>
Reply-To: jdanskinner@jdanskinner.com
References: <8ce22d01.0306020820.640a4c8b@posting.google.com> <bbftqf$b8$1@watsol.cc.columbia.edu> <vdnfcm1t55b4c@corp.supernews.com> <ZuQCa.94460$h42.92508@twister.nyc.rr.com>
User-Agent: KNode/0.7.1
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7Bit
X-Complaints-To: abuse@supernews.com
Lines: 68
Xref: newsmaster.cc.columbia.edu comp.protocols.kermit.misc:14351
Jeffrey Altman wrote:
> When you use a TAPI device you cannot communicate with the modem
> unless you instruct K95 to disable TAPI's control of the dialing
> sequence.
>
> SET TAPI MODEM-DIALING OFF
> SET TAPI LINE <device>
> SET CARRIER OFF
>
> ...
>
> Jeffrey Altman
> Kermit 95 Author, Volunteer
>
> JDan Skinner wrote:
>>
>> Thanks Frank;
>> Agreed!
>> I was able to get that far.
>> The problem (after some more searching) seems to be:
>> after the set port, if I do
>> set carr off
>> c
>> I get the terminal screen with cursor.
>> If I type
>> at<cr>
>> nothing is echoed to the screen, cursor does not move.
>> if I type
>> at&f<cr>
>> nothing ie echoed
>> if I type
>> atdt<phone_number><cr>
>> blind - I can hear the modem dial and negotiate and connect, I can login
>> blind as confirmed by later connection with the old machine
>> Nothing is ever displayed on the terminal screen. There is a modem icon
>> in the task bar which shows bi-directional traffic.
>> If I force HyperTerm to a direct serial connection to the modem and type
>> at<cr>
>> It works as one would expect, as K95 does on the old machine.
>> type
>> at<cr>
>> and it echos
>> OK
>>
>> I was suspicious of DTR but its value is unknown on both the working and
>> non-working machines.
>>
>> One more piece of confusion.
>> I tried the old script with the changes you suggest above.
>> It dials, connects and the login prompt is displayed on the command
>> screen. It switches to terminal screen with the same login prompt and
>> then nothing echos.
>>
>> More guidance please!!
Thanks Jeff
I tried your suggestion. No improvement.
I tried K95 with another Win modem and it worked
as expected. I assume the problem is with this
particular modem, but can't figure out exactly what.
Any ideas?
--
Regards...Dan
JDanSkinner@JDanSkinner.com